User Manual

88. . Command ReferenceCommand Reference
726 Titroprocessor, Instructions for use
127127
8 Command Reference
A method comprising various commands can be programmed in the
method editor. A method may comprise a maximum of 99 command lines.
Methods can be saved and reloaded direct from the method editor (softkey
[File] ).
ÚÄÄÄÄÄÄÄÄÄÄÄ¿
³Titration >³
³Changer >³
³CAL >³
³MEAS_* >³
³DOS >³
³STIR_I ³
³CASE >³
³COMM >³
³AUX >³
ÀÄÄÄÄÄÄÄÄÄÄÄÙ
The various commands of the 726 Titroprocessor can basically be divided
into two different groups.
On the one hand, there are the titration and measuring modes (incl. cali-
brating and conditioning modes), which comprise a considerable number
of parameters and settings, and primarily generate determination data. The
extended settings are accessible for the mode marked with the cursor us-
ing the softkeys designated by an asterisk ( [* Param], [* Formula]
and[* Report] ). The parameters set in the corresponding sub-windows
are only valid for this specific mode. Please note that due to the limited
memory, no more than five such modes can be programmed in a method.
On the other hand, there are the simple function commands, containing
only those parameters that can be entered directly in the method editor
window.
8.1 Titration modes
ÚÄÄÄ Method: NEU.mth ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ ³
³ t/s Command Parameter Parameter ³
³ ÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ³
³ 1 DET_PH* ³
³ Reagent Sensor ³
³ Concentr. Meas. input A1 ³
³ Dos. drive A1 ³
³ 2 MET_PH* ³
³ Reagent Sensor ³
³ Concentr. Meas. input A1 ³
³ Dos. drive A1 ³
³ 3 SET_PH* ³
³ Reagent Sensor ³
³ Concentr. Meas. input A1 ³
³ Dos. drive A1 ³
³ 4 SEC_PH* ³
³ Reagent Sensor ³
³ Concentr. Meas. input A1 ³
³ Dos. drive A1 ³
³ 5 KFT_IPOL* ³
³ Reagent Sensor ³
³ Concentr. Meas. input Apol ³
³ Dos. drive A1 ³
³ 6 KFC_IPOL* ³
³ Reagent Sensor ³
³ Concentr. Meas. input Apol ³
³ Dos. drive A1 ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ QUIT ÄÙ
ÚÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄ¿ ÚÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄ¿ ÚÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄ¿
³ Note ³ File ³Determ.³ ³ * ³ * ³ * ³ ³Insert ³Delete ³ >> ³
³ ³ ³report ³ ³ Param ³Formula³ Report³ ³line ³line ³ >> ³
ÀÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÙ