Owner's manual

5.4 Accessories
717 Sample Changer, Appendix
30
Sample Changer with 1 Tower without Pumps 2.717.0030
includes the following accessories:
Pieces
SGJ14 sleeve 2 6.1236.020
FEP tubing connector M6 80 6.1805.110
Bushing 3 6.2709.070
Splash protection 6.2751.010
Plug cover 6.2752.010
External Bus cable DB 37-pol 6.2135.000
Instructions for Use for 717 Sample Changer 8.717.1003
Sample Changer with 2 Towers and 2 Pumps 2.717.0110
includes following accessories
Pieces
SGJ14 sleeve 4 6.1236.020
SGJ14 plastic stopper 10 6.1446.000
SGJ9 stopper 6 6.1446.010
M6 thread stopper 2 6.1446.040
PE canister 10 liter 2 6.1621.000
FEP tubing connector M6 80 2 6.1805.110
PTFE tubing 4 meter 4/6 2 6.1812.000
Guiding shaft 2 6.1823.000
Connector for canister 2 6.1828.000
Fixing clip 10x 2 6.2053.000
Bushing 6 6.2709.070
Rotating nozzle 2 6.2740.000
Splash protection 6.2751.020
Plug cover 6.2752.010
External Bus cable DB 37-pol 6.2135.000
Instructions for Use for 717 Sample Changer 8.717.1003
Sample Changer with 2 Towers and 4 Pumps 2.717.0120
includes the following accessories:
Pieces
SGJ14 sleeve 4 6.1236.020
SGJ14 plastic stopper 10 6.1446.000
SGJ9 stopper 6 6.1446.010
M6 thread stopper 2 6.1446.040
SGJ14 stopper 6,4 mm 2 6.1446.160
M8 aspiration tip 2 6.1543.170
PE canister 10 liter 4 6.1621.000
FEP tubing connector M6 80 2 6.1805.110
FEP tubing connector M6 48 6 6.1805.420
PTFE tubing connector M8 60 2 6.1805.510
PTFE tubing 4 meter 4/6 4 6.1812.000
M8 screw connector 4/6 mm / M8 2 6.1820.030
Connector for canister 4 6.1828.000