User guide

14 Installation Guide
4
Attach the Grounding Lug
On the back panel, the R4000 provides two vertical grounding points
where a grounding lug may be installed. Use a Panduit
®
copper,
standard barrel, two-hole lug (part number LCD8-10A-L) or its
equivalent. Use two 10-32 screws to fasten the lug to the chassis. Use a
No. 8 AWG copper wire to connect the lug to the grounding point at
your site.
Connect to the Network
To connect to the network, simply insert singlemode cables from your
system equipment to the appropriate SC connectors on the CWDM
mux/demux module or OADM module. The modules’ color codes are
described below.
roloChtgnelevaWroloChtgnelevaW
nworbmn0161 teloivthgilmn0541
dermn0951 klahcmn0341
egnaromn0751 dnasmn0141
wolleymn0551 neergtnimmn0931
neergmn0351 neergnoommn0731
eulbecimn0151 esiouqrutmn0531
elprupcitsejammn0941 eulbredwopmn0331
kcalb%04mn0741 nworb-dermn0131
3