Specifications

95
Admin Privilege Commands
redloa : Set Loss of Activity time in seconds
(0-31).
redmode : Select Dynamic Recovery or
SelectAB mode of redundant
operation.
redtx : Send to both primary and secondary
output ports.
sduplexAll : Sets duplex for all ports on module.
sfdflowctrlAll : Sets Full Duplex Flow Control for
all ports on module.
shdflowctrlAll : Sets Half Duplex Flow Control for
all ports on module.
SONAR : Switch On No Activity Received.
telnetdisable : Disable telnet server.
telnetenable : Enable telnet server.
tftpdisable : Disable TFTP server.
tftpenable : Enable TFTP server.
transparent : Allows end points to transparently
auto-negotiate.
upgactivate : The activate flag to initiate the
upgrade process.
upgfilename : The filename to transfer from the
upgrade server.
upglocation : The location the upgrade server is to
transfer the image to on the module.
upgsrv : The IP Address of the upgrade
server to download from.
upgsrvpasswd : The password for applicable proto-
col use with the upgrade server.
upgsrvproto : the file transfer protocol to use with
the upgrade server.
upgsrvusrname: The username for applicable
protocol use with the upgrade server.
webdisable : Disable web server.
webenable : Enable web server.
webredirect : Redirect web user (browser) to this
URL.