Specifications

93
Admin Privilege Commands
Command: set
module
ftpdisable
Description: Disable the FTP server.
Syntax: set module ftpdisable <chassis> <module>
Note: Only applicable to management cards.
Example: Console>set module ftpdisable 1 17
FTP disabled.
Command: set
module
ftpenable
Description: Enable the FTP server.
Syntax: set module ftpenable <chassis> <module>
Note: Only applicable to management modules.
Example: Console>set module ftpenable 1 17
FTP enabled.
Command: set
module help
Description: Show ‘set module’ subcommands.
Syntax: set module help
Example: Console>set module help
Command Description
————————————————————
activefpga : FPGA image that is used at boot time.
activeos : OS image that is used at boot time.
asset : User supplied asset ID (32
characters maximum).
autorecover : Auto recovery for LLCF with LLR
deadlock potential.
autorevert : Revert to primary port if secondary
switchover occurred.
backpressure : Half Duplex Flow Control.
bootpdisable : Disable bootp server.
bootpenable : Enable bootp server.
datarate : Set Data Rate on MultiRate ILC.
dhcp : Enable or disable DHCP.
dhcpretries : Number of retries for the DHCP
daemon.
disable : Disable module and reflect it in
Admin Status.