Specifications

Command Line Interface
88
- INFO
- PRINT
Ok.
Command: set
logging help
Description: Show the ‘set logging’ subcommands.
Syntax: set logging help
Example: Console>set logging help
Command Description
————— ———————————————
add : Add a message severity to be
displayed at the console.
all : Send all log messages to the
console.
delete : Don't display a message severity at
the console.
help : Show this message.
none : Don't send any log messages to the
console.
Command: set
logging none
Description: Do not show any messages at the console.
Syntax: set logging none
Note: Events will still be logged, just not displayed.
Example: Console>set logging none
Ok. No messages will be displayed.
Command: set
module
activefpga
Description: Select the FPGA image (primary or secondary)
that is used at boot time.
Syntax:
set module activefpga <chassis> <module> <1 | 2>
Note: Only applicable to services line cards.
Example: Console>set module activefpga 1 2 2
Active FPGA Successfully set.