Specifications

87
Admin Privilege Commands
Command: set
logging add
Description: Display messages of a given severity at the
console.
Syntax: set logging add <severity>
Note: Messages are logged onto the screen only
when connected via the serial console port.
This command has no effect during a telnet
session. Use ‘show log severities’ to determine
available severities.
Example: Console>set logging add fault
+ FAULT
Ok.
Console>set logging add fault fatal
+ FAULT
+ FATAL
Ok.
Command: set
logging all
Description: Show all messages at the console.
Syntax: set logging all
Example: Console>set logging all
Ok. All messages will be displayed.
Command: set
logging delete
Description: Do not display message of a given severity at
the console.
Syntax: set logging delete <severity>
Note: Use ‘show log severities’ to determine available
severities. Messages are still logged, just not
printed to the console.
Example: Console>set logging delete print
- PRINT
Ok.
Console>set logging delete print info