Specifications

85
Admin Privilege Commands
chassis : Set chassis; use ‘set chassis help’ for
more info.
community : Set community.
help : Show this message.
ip : Set IP; use 'set ip help' for more info.
logging : Set system logging configuration infor-
mation.
module : Set module; use 'set module help' for
more info.
motd : Set Message of the Day.
port : Set port; use 'set port help' for more info.
prompt : Set prompt.
radius : Set RADIUS; use 'set radius help' for
more info.
snmp : Set SNMP; use 'set snmp help' for more
info.
system : Set system; use 'set system help' for
more info.
time : Set time and date.
trap : Set trap; use 'set trap help' for more info.
Command: set
ip address
Description: Reset the device IP address and mask.
Syntax: set ip address <if#> <IP address> <mask>
Note: The ‘if#’ is the interface number that appears in
the ‘show interface’ table.
Example: Console>set ip address 2 192.168.1.100
255.255.255.0
Setting i/f 2 IP address to 192.168.1.100 with
netmask 255.255.255.0...