Specifications

Command Line Interface
82
Reset Commands
Command:
reset chassis
Description: Reset one chassis or all chassis in a stack. This
commands resets all the line cards in the
specified chassis or all chassis in a stack.
Options: Use the “default” option to reset the cards in the
chassis to their factory default settings. The
“register” option only applies to the services line
card(s) in the chassis. The “register” option
forces a physical reset on the services line
card, instead of a messaging reset.
Syntax: reset chassis <chassis> [default | register]
reset chassis all [default | register]
Example: Console>reset chassis all
Ok.
Command:
reset help
Description: Display the ‘reset’ subcommands.
Syntax: reset help
Example: Console>reset help
Command Description
————— ——————————
chassis : Reset chassis.
help : Show this message.
module : Reset module.
remote : Reset remote.
Command:
reset module
Description: Reset a module.
Options: Use the “default” option to reset the module to
its factory default settings.
The “register” option is only applicable to a
services line card. This option forces a physical
reset on the services card, instead of a
messaging reset. The “register” option is helpful
if you are unable to reach a services line card