Specifications

Command Line Interface
72
1/17/2 Port1_17_2 Link Half 10Mb e10BaseT n/a n/a Active RJ45
2/15/1 Port2_15_1 Link Full 10Mb e10BaseT Disabled n/a Active RJ45
2/15/2 Port2_15_2 Link Full 10Mb e10BaseFL_MM n/a Enabled Active ST
2/17/1 Port2_17_1 Link Half 10Mb e10BaseT n/a n/a Active RJ45
Location Name Speed DataBits Parity StopBits FlowControl Connector
———————————————————————————————————————
1/17/3 Port1_17_2 9600 Eight None One None DB9
2/17/2 Port2_17_2 9600 Eight None One None DB9
Example #2: Console>show port 1 3
Location Name Status Duplex Speed Type ANeg LLR Activity Connector
———————————————————————————————————————
1/3/1 Port1_3_1 Link Half 100Mb e100BaseTX Enabled n/a Active RJ45
1/3/2 Port1_3_2 Link Half 100Mb e100BaseFX_MM n/a Enabled Active SC
Example #3: Show port information for a remote access line
card’s copper port.
Console>show port 1 3 2 1 1
Location : 1/3/2/1/1
Name : Port1_3_2_1_1
Port Type : e100BaseTX
Connector Type : RJ45
Uptime : 2 days 03:08:45.55
Link Status : Link
Activity : Active
Port State Oper : Enabled
Autonegotiation Oper : Disabled
Port Speed Oper : 100Mb
Port Duplex Oper : Full
Rx Burst Length Oper : 16
Tx Burst Length Oper : 16
Provisioned Rx Bandwidth Oper : 38
Provisioned Tx Bandwidth Oper : 62
Rx Blocked Packets : 0
Tx Blocked Packets : 0
Rx Blocked Octets : 0