Specifications

Guest Privilege Commands

show module <chassis> <module> <port>

Note: Specifying an individual module shows all its

details.

Example #1: Console>show module all

Location State Type Name Desc #ports

———————————————————————————

1/3 Enabled Single Module1_3 10M TP to BNC 2

1/4 Enabled Access Module1_4 100M TX to FX SM/SC S/IP 2

1/4/2/1 Enabled Access Module1_4_2_1 100M TX to FX SM/SC S/IP 2

1/5 Enabled Access Module1_5 100M TX to FX SM/SC S/IP 2

1/7 Enabled Access Module1_7 100M TX to FX SM/SC S/IP 2

1/8 Enabled Access Module1_8 100M TX to FX SM/SC S/IP 2

1/10 Enabled Single Module1_10 10M TP to FL MM/ST 2

1/11 Enabled Single Module1_11 10M TP to FL/MM/ST 2

1/16 Enabled Gigabit Module1_16 1000M TX to LX SM/SC 2

1/17 Enabled Management Module1_17 10M Dual TP Management 3

2/2 Enabled Management Module2_2 10M TP Management 2

Example #2: Display details for a Gigabit line card.

Console>show module 1 16

Location : 1/16

Name : Module1_16

Type : Gigabit

Asset ID :

Description : 1000M TX to LX SM/SC

Hardware Revision : A

Part Number : R152-1D

Serial Number : 20115

Manufacturing Date : 03/07/2005

Module State Oper : Enabled

Diagnostic Status : Good

Number of ports : 2

Number of slots : 1

Uptime : 4 days 00:23:07.15

Link Loss Carry Forward Oper : Disabled