Specifications

Command Line Interface
54
Command: up Description: Set the scope up one or more levels.
Syntax: up [level]
Note: If no level is specified, the scope will move up
one level.
Example: #1/11/2/1/2>up
#1/11/2/1>up 3
#1>
Show Commands
Command:
show acl
Description: Show entries in the Access Control List (ACL)
which allows a user to limit the end stations (IP
addresses) that communicate with the chassis.
Note: Protocols/services effected: FTP, TELNET,
SNMP.
Syntax: show acl
Example: Console>show acl
Algorithm applied to grant access is:
(IP Address AND Validation Mask) EQUALS
(incoming IP Address AND Validation Mask)
Current ACL entries:
Ip Address Validation Mask
——————— ———————
100.132.065.099 255.255.255.255
100.132.065.023 255.255.255.255