Specifications

53
Guest Privilege Commands
Command:
remote
Description: Set the remote scope. The command prompt
displays the selected chassis, module, port and
remote card. The chassis, module, port and
remote card numbers are no longer entered in
commands which have these fields (e.g., ‘show
module’ instead of ‘show module 1 11 2 1’).
Syntax: remote <chassis> <module> <port> <remote>
Example: Console>remote 1 11 2 1
#1/11/2/1>
Command:
remoteport
Description: Set the remote port scope. The command
prompt displays the selected chassis, module,
port, remote card and remote port. The chassis,
module, port, remote card and remote port
numbers are no longer entered in commands
which have these fields (e.g., ‘show port’
instead of ‘show port 1 11 2 1 2’).
Syntax: remoteport <chassis> <module> <port>
<remote> <remoteport>
Example: Console>remoteport 1 11 2 1 2
#1/11/2/1/2>
Command: top Description: Reset the scope so nothing is specified.
Syntax: top
Example: #1/11/2/1/2>top
Console>