Specifications

Installation Guide

Instructions

To log on to the network, do the following:

• Type your user name at the login prompt and hit <Enter>.

The three default names are guest, admin and root.

• Type your password at the Password prompt and hit

<Enter>. The default passwords are the same as their

corresponding user names. Passwords are not displayed.

To view the current user/password list, delete a user or add a

new user, refer to the ‘user’ commands, which are admin

privilege commands.

Example:

Password:

sh05 :00000000:INFO (User <Administrator> logged in)

Console>user -all

admin:~N6H1~B:11:11:Administrator:/:psh

guest:~H~Dh‘1:21:21:Guest:/:psh

Console>

CLI Access Via Modem

To access the Command Line Interface (CLI) using a modem,

the modem must be configured properly to support remote

communications with the console port on the management

card.

To configure your modem, use the AT command set or the

software provided by the modem manufacturer. The settings

required to enable a Zoom/Fax Modem V.34X+ Model 2836 to

communicate with a Metrobility management card are shown