Specifications

Installation Guide

Name of the Boot image is boot.bin

Boot via the DISK Bootloader

Disk device type is FLASH

ID of the disk to be used is 0

Volume is pHILE formatted

The ﬁle to download and start is corepm.biz

RADIUS authentication for the console is not disabled.

RADIUS failure defaults to local authentication is not enabled

Allow Telnet user to execute secure CLI commands is not enabled

After board is reset, start-up code will wait 10 seconds

———————————————————————————

(M)odify any of this or (C)ontinue? [M] c

If you are satisfied with the configuration parameters, type

<c> to continue with the boot process. The boot process auto-

matically continues if no key is pressed within 10 seconds.

Verifying volume.

FLASH driver initialized...

Starting disk download of 44.0.0/corepm.biz...

Decompressing ... One moment...

Each . equals 10K bytes processed (uncompressed)

..........

.....

Decompression Complete!

Disk load completed

Transferring control to the downloaded code