Specifications

25
Installation Guide
Baud rate for serial channels [9600]
HARDWARE PARAMETERS:
Do you want to change the board's Primary Ethernet MAC address?
[N]
Do you want to change the board’s Secondary Ethernet MAC
address? [N]
The following questions relate to stacking and load type.
Note: The maximum number of chassis supported in a stack
is seven (7).
M7500 BOOTLOADER PARAMETERS:
Is this Chassis in a Stack? [Y]
Stack Position (1-7)? [1]
Boot from (D)isk or via (T)ftp over the network? [D]
Transfer file to disk via TFTP? [N]
Name of the file to load and start? [corepm.biz]
The following questions ask whether or not to override the
console port, enable authentication locally if there is a
RADIUS failure, and allow a user to perform secure
commands via Telnet. It also asks for the length of time to wait
before the CPU restarts.
Disable RADIUS authentication for the console? [Y]
Enable local authentication on RADIUS failre? [Y]
Enable Telnet user to execute secure console commands? [Y]
How long (in seconds) should CPU delay before starting up? [10]
The boot loader allows the operating system to be loaded
from either the on-board file system or from a network acces-
sible file system via TFTP. The on-board file system is the
default method of image load.