Specifications

21
Installation Guide
The following configuration information is required:
Boot Option
Description
Manual Config:
File System
Requires the user to input system configuration
information, then starts the operating system from
the on-board file system using that information.
System configuration information is saved through
power cycles.
BOOTP
Contacts a BOOTP server in your network to get
system information used to boot.
Manual Config:
TFTP Boot
Requires the user to input system information, then
starts the operating system from a TFTP server
using that information. System configuration
information is saved through power cycles.
Name IP
When Required Description
IP Address BOOTP, File, TFTP
The IP address of the system is
required to start the operating
system.
If BOOTP is used, the IP address
must be set to 0.0.0.1.
If RARP is used to get the IP
address, 0.0.0.0 must be placed in
the IP address field.
IP Subnet
Mask
BOOTP, File, TFTP
The IP subnet mask is required to
start the operating system.
Boot Type BOOTP, File, TFTP
Used to determine if the system
will load the operating system from
the local file system or from a
networked file system via TFTP.
File Name TFTP
If the file is to be loaded via TFTP,
the user must enter the operating
system path and file name on the
remote file system.
Default
Gateway
If a default gateway
is in your network.
Your network default router
gateway.