Specifications

11
Introduction
Chapter 1: Introduction
This document contains installation procedures and console
commands necessary for the operation of the Metrobility
R502-M management card. The first section describes how to
connect the card to the network and to boot up for SNMP
management. The document also describes the commands
available to three privilege classes of users:
-->Guest
-->Admin
-->Root
Guest users can view information about the system, but
cannot modify any of the fields. Admin users can monitor and
configure the system, including its modules and ports. Root
users, under the direction of a Metrobility support engineer,
can customize or recover the system and internal file system.
The three user privileges correspond to a login and password
of the same name. This list is cumulative (i.e., Admin privi-
leges include Guest privileges, and Root privileges include all
commands).
The Console Commands are organized by the three user
privilege groups. The commands are listed by type (set, show,
etc.). Use the comprehensive Table of Contents to locate
documentation for a particular command.