Specifications

Command Line Interface
122
Command: set
trap help
Description: Show ‘set trap’ subcommands.
Syntax: set trap help
Example: Console>set trap help
Command Description
————————————————————
control : Set SNMP trap control.
destination : Set SNMP trap destination.
help : Show this message.
Show Command
Command:
show snmp
community
Description: Show SNMP community information.
Syntax: show snmp community
Example: Console>show snmp community
SNMP Community information:
get-request community: ‘public’
set-request community: ‘public’
Command:
show snmp
engineID
Description: Show the unique engine identifier for an SNMP
v3 agent.
Syntax: show snmp engineID
Example: Console>show snmp engineID
EngineID
—————————————————
80000ab90542303034393030393337