Specifications

121
Admin Privilege Commands
set trap destination <IP address> <UDP port>
create <active | inactive> [name] [V1 | V2]
To modify an entry:
set trap destination <IP address> <UDP port>
<active | inactive>
set trap destination <IP address> <UDP port>
<name>
set trap destination <IP address> <UDP port>
<V1 | V2>
Notes: 1. Use ‘show trap destination’ to view trap
destination details.
2. NetBeacon automatically adds itself to
the Trap Destination table. Removing or
uninstalling the entry will have an adverse
effect on NetBeacon.
Example:
Console>set trap destination 192.168.1.99 9162 create active MyPC V2
Trap Destination Entry added
Console>show trap destination
IP Address Udp Port Status Name Snmp Version
———————————————————————————
192.168.1.100 9162 Active NetBeacon 192.168.1.100 V1
192.168.1.99 9162 Active MyPC V2
Console>set trap destination 192.168.1.99 9162 V1
Console>show trap destination
IP Address Udp Port Status Name Snmp Version
———————————————————————————
192.168.1.100 9162 Active NetBeacon 192.168.1.100 V1
192.168.1.99 9162 Active MyPC V1