Specifications

Command Line Interface
120
Command: set
system location
Description: Set the MIB-2 system location string.
Syntax: set system location <location>
Note: Multi-word strings must be placed in quotes.
Example: Console>set system location Nashua
Ok.
Command: set
system name
Description: Set the MIB-2 system name string.
Syntax: set system name <name>
Note: Multi-word strings must be placed in quotes.
Example: Console>set system name "Metrobility hub"
Ok.
Command: set
time
Description: Set time and date.
Syntax: set time <mm/dd/yyyy> <hh:mm:ss>
Example: Console>set time 04/13/2005 15:00:00
Date 04/13/2005
Time 15:00:00
Command: set
trap control
Description: Enable or disable specific traps.
Syntax: set trap control <trap_index> <enable |
disable>
Note: The ‘trap_index’ is the number to the left of the
Trap Name in the ‘show trap control’ table (e.g.,
4 is the index for the Generic Link Up trap).
Example: Console>set trap control 4 disable
Ok.
Command: set
trap destination
Description: Add a management station as a destination for
traps; or modify an existing destination’s status,
name or SNMP version.
Syntax: To add an entry: