Specifications

119
Admin Privilege Commands
Command: set
snmp
community
Description: Set the SNMP community names.
Syntax: set snmp community <get | set> [name]
Note: If the string is left blank, access to the
community will be unprotected.
Example: Console>set snmp community get public
Ok.
Command: set
snmp help
Description: Show the ‘set snmp’ subcommands.
Syntax: set snmp help
Example: Console>set snmp help
Command Description
—————————————————
community : Set community string.
help : Show this message.
user : Set SNMP user.
v1/v2 : Enable/disable SNMP v1/v2
access.
Command: set
snmp user
Description: Create an SNMP user.
Syntax: set snmp user <username> [auth-type <md5 |
sha> <password>] [priv-type des <password>]
Example: Console>set snmp user tempuser auth-type sha temp
Ok.
Command: set
snmp v1/v2
Description: Enable or disable SNMP version 1/ 2 access.
Syntax: set snmp v1/v2 <enable | disable>
Example: Console>set snmp v1/v2
Command: set
system help
Description: Show the ‘set system’ subcommands.
Syntax: set system help
Example: Console>set system help
.