Specifications

Command Line Interface
114
loopback : Set port loopback.
name : Set port name.
remotelpbk : Set remote loopback.
speed : Set port speed (10/100 Mbps).
Command: set
port
linebuildout
Description: Set the line length for a copper port on a T1/E1
line card.
Syntax: set port linebuildout <chassis> <module>
<port> [<remote> <remoteport>] <linebuildout>
where <linebuildout> is
T1 E1
————————————
0-133ft/0dB short
133-266ft long
266-399ft
399-533ft
533-655ft
-7.5dB
-15dB
-22.5dB
Note: For T1 cards, <linebuildout> may be shortened
to the first four characters of the option (for
example, type “133-” instead of “133-266ft”).
Example: Console>set port linebuildout 1 14 1 133-266ft
Line Length successfully set.
Command: set
port linecode
Description: Select whether AMI or B8ZS/HDB3 line coding
will be used for receiving and transmitting data.
Syntax: set port linecode <chassis> <module> <port>
<AMI | [B8ZS | HDB3]>
Note: 1. B8ZS is the T1 default setting; HDB3 is
the E1 default.
2. Only applies to the copper port of a T1/E1
card.
Example: Console>set port linecode 1 14 1 AMI
Line Coding successfully set.