Specifications

103
Admin Privilege Commands
Command: set
module
sduplexAll
Description: Set all the ports on a chassis stacking line card
to half or full duplex.
Syntax: set module sduplexAll <chassis> <module>
<half | full>
Note: If auto-negotiation is enabled on a port, it will
ignore this setting.
Example: Console>set module sduplexAll 3 1 full
Duplex successfully set.
Command: set
module
sfdflowctrlAll
Description: Enable or disable Full Duplex (FD) Flow Control
on all ports of a chassis stacking line card.
Syntax: set module sfdflowctrlAll <chassis> <module>
<enable | disable>
Note: FD Flow Control only pertains to a port when it
is in full-duplex mode, auto-negotiation is
enabled on the port, and its link partner has
indicated that it supports PAUSE frames.
Example: Console>set module sfdflowctrlAll 3 1 enable
FD Flow Control successfully set.
Command: set
module
shdflowctrlAll
Description: Enable or disable Half Duplex (HD) Flow
Control on all ports of a chassis stacking line
card.
Syntax: set module shdflowctrlAll <chassis> <module>
<enable | disable>
Note: Only applicable to half-duplex ports.
Example: Console>set module shdflowctrlAll 3 1 enable
HD Flow Control successfully set.
Command: set
module SONAR
Description: Modify the Switch On No Activity Received
(SONAR) status on a redundant interface line
card.
Syntax: set module SONAR <chassis> <module>
<enable | disable>