Specifications

Command Line Interface
100
Command: set
module mvlan
Description: Set the management VLAN identifier for the
internal management port on a services line
card.
Syntax: set module mvlan <chassis> <module> [<port>
<remote>] <VLAN ID>
Note: The VLAN ID is any number in the range 1 to
4094.
Example: Console>set module mvlan 4086
Management VLAN Successfully set.
Command: set
module name
Description: Set a module’s name.
Syntax: set module name <chassis> <module[-
converter]> [<port> <remote>] <name>
Note: Multi-word strings must be placed in quotes.
There is a limit of 32 characters for the module
name. Do not use the following characters: . : ;
& = < >.
Example: Console>set module name 1 8 "Module Name"
Name successfully set.
Command: set
module portfctl
Description: Set the specified port’s capability for flow
control on services line card.
Syntax: set module portfctl <chassis> <module> <port>
[<rmtModule> <rmtPort>] <enable | disable>
Example: Console>set module portfctl 1 5 1 enable
Port FCTL Successfully set.
Command: set
module
portlbktime
Description: Specify the maximum number of seconds the
services line card can remain in loopback
mode. The default is 30 seconds. The range is
30 to 300 seconds.
Syntax: set module portlbktime <chassis> <module>
[<port> <rmtModule>] <30-300>
Example: Console>set module portlbktime 1 2 250
Port Loopback Timeout Successfully set.