Specifications

99
Admin Privilege Commands
UPDT :00000000: SEVERE (Clearing lock on boot image FLASH
sectors)
UPDT :00000000: SEVERE (Erasing boot image FLASH sectors)
UPDT :00000000: SEVERE (Starting to write boot image FLASH)
UPDT :00000000: SEVERE (Setting lock on boot image FLASH
sectors)
UPDT :00000000: SEVERE (Performing verification of updated
boot image in FLASH)
UPDT :00000000: SEVERE (FLASH boot image successfully
updated from file 44.0.0/boot.bin)
Command: set
module
l3capability
Description: Enable or disable the capability of the services
line card to receive/transmit IP packets.
Syntax: set module l3capability <chassis> <module>
[<port> <remote>] <enable | disable>
Example: Console>set module l3capability 1 13 2 1 enable
L3 Capability Successfully set.
Command: set
module llcf
Description: Modify Link Loss Carry Forward status.
Syntax: set module llcf <chassis> <module[-converter]>
[<port> <remote>] <enable | disable>
Note: 1. Pertains to the ability of an input port to
forward the link test pulse to its output
port. If disabled, the output port will
always generate link pulses, regardless of
input port link status. This feature is not
available on all modules.
2. If LLCF is enabled on a remote access
line card and it loses its link on the copper
port, you will no longer be able to manage
the remote device.
Example: Console>set module llcf 1 11 disable
LLCF successfully set.