User guide

Radiance 1Gbps Interface Line Cards with SFP Optics 13
Fiber Optic Power Monitors
Through software*, you can read the receive (RX) and transmit (TX) power
levels on the 1Gbps line card’s fiber optic port(s). The accuracy of the RX and
TX monitors is ±5%.
Receive Power Level
The RX power monitor shows a reading between -40 dB and 0 dB.
Transmit Power Level
The TX power monitor shows a reading between -16 dB and +11 dB.
Internal Temperature Reading
Through software, you can obtain the internal temperature reading for Port 2. To
view the temperature, an SFP transceiver must be installed in Port 2. The
temperature range is from -40° to +125° C.
* Refer to the Command Line Interface Reference Guide , NetBeacon Element Management Software Installation &
User Guide or WebBeacon Management Software Installation & User Guide for software management information.