User guide

Radiance R400 Premise Service Platform 7
2
Choose an Appropriate Location
The Radiance R400 is intended for use in office and industrial environ-
ments. Attach the four rubber feet to the bottom of the unit and place it
on a flat surface. The feet provide a space for air circulation.
The R400 may be oriented in any manner that allows you to make the
physical connection to the power source and leaves a minimum of six
(6) inches of space around it for proper ventilation.
The R400 must be located within six (6) feet of the AC power source(s)
being used and placed as far away as possible from electrical noise
generating equipment such as copiers, electrostatic printers and other
motorized equipment. If exposed twisted-pair wiring is used nearby, the
wiring should be routed as far away as possible from power cords and
data cables to minimize interference.