User guide

6 Installation Guide

Installation Guide

Follow the simple steps outlined in this section to install and start using the

Radiance DIN Rail Mounted Chassis.

NOTE: Electrostatic discharge precautions should be taken when handling any

line card. Proper grounding is recommended (i.e., wear a wrist strap).

Unpack the Chassis and Accessories

Check that the following components have been included:

• Radiance DIN rail mounted chassis

• CD-ROM

The following items are available separately:

• NetBeacon

software

• Line cards

• Management card

Your order has been provided with the safest possible packaging, but

shipping damage does occasionally occur. Inspect it carefully. If you

discover any shipping damage, notify the carrier and follow their

instructions for damage and claims. Save the original shipping carton if

return or storage of the unit is necessary.

Remove Protective Film

A clear protective film covers the sides of the chassis. Lift up an edge

and peel off the plastic film from both sides.