User guide

20 User Guide
Singlemode Fiber Optic Interface — extended long haul distance support
Connector _____________________________________________________ SC
Wavelength _______________________________________________ 1550 nm
RX Input Sensitivity ________________________________ -37 dBm minimum
Output Power ___________________________ -3.0 dBm to 0 dBm (9/125 µm)
Supported Link Length _________________________ up to 100 km full duplex
Cable Type ______________________ 8.3/125, 8.7/125, 9/125, 10/125 µm F/O
Singlemode BWDM Fiber Optic Interface
Connector _____________________________________________________ SC
Supported Link Length __________________________ up to 20 km full duplex
Cable Type ___________________________________________ 9/125 µm F/O
RX Input Sensitivity ________________________________ -32 dBm minimum
Output Power ___________________________ -8 dBm to -15 dBm (9/125 µm)
(R115-2X, R175-2X)
TX Wavelength __________________________________________ 1550 nm
RX Wavelength __________________________________________ 1310 nm
(R115-2Y, R175-2Y)
TX Wavelength __________________________________________ 1310 nm
RX Wavelength __________________________________________ 1550 nm
Data Rate
Data Rate _________________________ 44.736 Mbps (T3); 34.368 Mbps (E3)
Power
Input _________________________________+5.0 VDC @ 0.4 A, 2 W average
Environmental
Operating Temperature ____________________________________ 0° to 55° C
Storage Temperature ____________________________________ -30° to 70° C
Relative Humidity __________________________ 5% to 95% non-condensing
Weight_______________________________________________ 5 oz (0.14 kg)