User`s guide

8 Metrobility 10/100Mbps Delta Class AutoTwister
fiber optic port. A port operates at full duplex when its FD switch is ON. It
operates at half duplex when its FD switch is OFF. The default is full
duplex enabled.
Speed Switch (100M1)
*
Switch 100M1 controls the speed setting for the copper port. If auto-
negotiation is disabled, the port speed will be the same as this switch
setting, where ON is 100Mbps and OFF is 10Mbps. The default speed
setting is 100Mbps. When auto-negotiation is enabled, the 100M1 switch
setting is ignored.
Auto-Negotiation Switch (AN1)
*
Switch AN1 controls the use of auto-negotiation on the copper port. To
enable auto-negotiation, set the switch ON. To disable the function, set
the switch OFF. By default, auto-negotiation is enabled.
When the copper port has auto-negotiation enabled, it advertises
100Mbps full duplex capabilities. When auto-negotiation is disabled, the
port’s duplex is set by the FD1 switch, and its speed is set by the 100M1
switch.
DIP Switch Configuration Table
Use the following table to help you set the DIP switches to obtain specific
modes of operation. The configuration column lists the speed and duplex
options for the copper port (Port 1) on the left and the fiber port (Port 2)
on the right. “Auto” indicates that auto-negotiation is enabled.
noitarugifnoC
)2troP-1troP(
)reppoC(1troP)rebiF(2troP
1DF1NA1M0012DF
xelpuDlluFspbM001-otuAANNOANNO
xelpuDflaHspbM001-otuAANNOANFFO
xelpuDflaHspbM001-xelpuDflaHspbM01FFOFFOFFOFFO
xelpuDlluFspbM001-xelpuDflaHspbM01FFOFFOFFONO
xelpuDflaHspbM001-xelpuDlluFspbM01NOFFOFFOFFO
xelpuDlluFspbM001-xelpuDlluFspbM01NOFFOFFONO
xelpuDflaHspbM001-xelpuDflaHspbM001FFOFFONOFFO
xelpuDlluFspbM001-xelpuDflaHspbM001FFOFFONONO
xelpuDflaHspbM001-xelpuDlluFspbM001NOFFONOFFO
xelpuDlluFspbM001-xelpuDlluFspbM001NOFFONONO
*Changes to switches 100M1 and AN1 only come into effect after the power-cycle initialization.