User`s guide

20 Metrobility 10/100Mbps Delta Class AutoTwister
Technical Specifications
Network Connections
Twisted-Pair Interface
Connector ____________________________Shielded RJ-45, 8-pin jack
Impedance ________________________________ 100 Ohms nominal
Signal Level Output (peak differential) ________ .95 to 1.05V (100Mbps)
__________ 2.2 to 2.8V (10Mbps)
Signal Level Input ____________________ 200mV minimum (100Mbps)
_____________________ 585mV minimum (10Mbps)
Supported Link Length __________________________________ 100m
Cable Type _________ (10Mbps segments) Category 3, 4 or 5 UTP/STP
_________(100Mbps segments) Category 5 or 5E UTP/STP
Multimode Fiber Optic Interface
(M643-13, M643-15, M643-1E, M643-1G, M643-1K)
Connector ___________________________ SC, ST, MT-RJ, VF-45, LC
Wavelength _________________________________________ 1310nm
RX Input Sensitivity __________________________ -31 dBm maximum
Output Power __________________ -23.5 dBm to -14 dBm (50/125 µm)
________________ -20 dBm to -14 dBm (62.5/125 µm)
Supported Link Length ______________________ up to 2km full duplex
Cable Type ____________________________50/125, 62.5/125 µm F/O
Singlemode Fiber Optic Interface
(M643-14, M643-16, M643-1M)
Connector ___________________________________________ SC, LC
Wavelength _________________________________________ 1310nm
RX Input Sensitivity __________________________ -31 dBm maximum
Output Power _____________________ -15 dBm to -8 dBm (9/125 µm)
Supported Link Length _____________________ up to 20km full duplex
Cable Type _____________________________________9/125 µm F/O
Singlemode Fiber Optic Interface — long haul distance support
(M643-17)
Connector ______________________________________________ SC
Wavelength _________________________________________ 1310nm
RX Input Sensitivity __________________________ -31 dBm maximum
Output Power _______________________ -5 dBm to 0 dBm (9/125 µm)
Supported Link Length _____________________ up to 40km full duplex
Cable Type _____________________________________9/125 µm F/O