Network Management Guide Lancast CenturyStack Managed Hub 10/100Mbps 8100

62 CenturyStack 8100 Managed Hub
To configure the Event Group:
1. Enter an index number in the Event Group Index field.
2. Enter a description.
3. Select the Event Type.
4. Enter a valid Event Community name.
5. Enter the Event Owner name.
6. Set the Event Status to valid.
7. Select Add to add the Event Group.
After saving an Event Group, the configuration is written under Current
Configurations. The New Configuration is empty and available to enter
another Event Group. See below.
Event Group Index The event group index number
Event Description Event description
Event Type No Change/Event None/Log/Trap/Log & Trap
Event Community Name of a valid event community
Event Owner Name of the Event Owner
Event Status No Change/valid/underCreation/invalid