Network Management Guide Lancast CenturyStack Managed Hub 10/100Mbps 8100

Controlling CenturyStack Hubs 35
Security Intrusion-2
To configure Security Intrusion:
1. Select a port number from the Port Number drop down list.
2. Set the Intrusion Status.
3. Set the Intrusion Auth Address Auto Learn.
4. Enter the Intrusion Auth MAC Address.
5. Set the Intrusion Action.
6. Save
Security Intrusion Control/Status
Group Number Hub ID of a hub in the stack
Port Number Number of the port that is selected
in the Group Number configuration
Intrusion Control Enabled/Disabled
Intrusion Address Auto Learn Enabled/Disabled
Intrusion MAC Address Type in the intrusion MAC address
Intrusion Action No Action/Send Trap/Partition Port/Both