User guide

6 Installation Guide
2
Installation Guide
Follow the simple steps outlined in this section of the guide to install and start
using your Metrobility “twister” media converter.
Unpack the “twister” and Accessories
Check that the following components have been included with your order:
• “twister” 2131 media converter
• Power supply
• Power cord
• Four (4) rubber feet
Your order has been provided with the safest possible packaging, but
shipping damage does occasionally occur. Inspect your order carefully. If
you discover any shipping damage, notify the carrier and follow their
instructions for damage and claims. Save the original shipping carton if
return or storage of the unit is necessary.
Choose an Appropriate Location
The “twister” MM-to-SM media converter is intended for use in either
office or industrial environments. The unit must be located within six (6)
feet of the AC power source being used and placed as far away as possible
from electrical noise generating equipment such as copiers, electrostatic
printers and other motorized equipment. If exposed twisted-pair wiring is
used nearby, the wiring should be routed as far away as possible from power
cords and data cables to minimize interference.
The units may be oriented in any manner which permits you to make
physical connection to the power supply and leaves a minimum of six (6)
inches of space for proper ventilation.
TUV Compliance Note: For pluggable equipment, the socket outlet must be
installed near the equipment and be easily accessible.
Bei Geräten mit Steckanschluß muß die Steckdose nahe dem Gerät angebrachtund leicht zugänglich sein.
1