User guide

“twister” 2131 Multimode-to-Singlemode Media Converter 13
Technical Specifications
Data Rate
Data Rate _________________________________________ 100Mbps half duplex
_________________________________________ 200Mbps full duplex
Bit Delay ___________________________________________________ < 40 bits
Network Connections
Multimode Fiber Optic Interface
Connector ___________________________________________________ ST or SC
RX Input Sensitivity _______________________________ -31 dBm peak minimum
Output Power __________________________ -14 dBm to -23.5 dBm (50/125 µm)
__________________________ -14 dBm to -20 dBm (62.5/125 µm)
Supported Link Length _______________________________ up to 2km full duplex
Cable Type _____________________________ 50/125, 62.5/125, 100/140 µm F/O
Singlemode Fiber Optic Interface
Connector ___________________________________________________ ST or SC
RX Input Sensitivity _______________________________ -31 dBm peak minimum
Output Power ______________________________ -8 dBm to -15 dBm (9/125 µm)
Supported Link Length ______________________________ up to 15km full duplex
Cable Type _________________________ 8.3/125, 8.7/125, 9/125, 10/125 µm F/O
Power
Input ________________________________________ 90-260V AC 50/60 Hz
Output _____________________________________________ +5VDC @ 1.2 A
Environmental
Operating Temperature _______________________________________ 0° to 55° C
Storage Temperature ________________________________________ -25° to 70° C
Relative Humidity _____________________________ 5% to 95% non-condensing
Physical Case ____________________________ Fully enclosed metal construction
Dimensions __________________________________ 4.83" L x 3.26" W x 1.71" H
____________________________________ 12.3 cm x 8.3 cm x 4.3 cm
Weight (including power supply) ______________________________ 3 lb, 1.36 kg
Regulatory
Compliance ___________________________________ IEEE 802.3u 100BASE-FX