Instructions

Fernzugriff
101
* Command error:
(-199 to -100)
They indicate that a syntax error has been detected by the syntax analyzer and causes event
register bit 5, called CME, CoMmand Error to be set to 1.
-101 : Invalid character
-103 : Invalid separator
-104 : Data type error
-108 : Parameter not allowed
-109 : Missing parameter
-111 : Header separator error
-112 : Program mnemonic too long
-113 : Undefined header
-114 : Header suffix out of range
-121 : Invalid character in number
-128 : Numeric data not allowed
-131 : Invalid suffix
-138 : Suffix not allowed
-141 : Invalid character data
-148 : Character data not allowed
-151 : Invalid string data
-154 : String data too long
-171 : Invalid expression
* Execution errors:
(-299 to -200)
They indicate that an error has been detected at the moment of command execution and
causes event register bit 4, called EXE, Execution Error, to be set to 1.
-200 : Execution error
-213 : Init ignored
-221 : Sandtings conflict
-222 : Data out of range
-232 : Invalid format
-256 : File name not found
-257 : File name error
* Specific instrument errors:
(-399 to -300)
They indicate that an abnormal error has been detected during execution of a task, and causes
event register bit 3, called DDE, Device Dependent Error to be set to 1.
-300 : Device-specific error
-321 : Out of memory
-350 : Queue overflow
-360 : Communication error
* Query errors:
(-499 to -400)
They indicate that an abnormal error has been detected during execution of a task, and cause
event register bit 2, called QYE, QuerY Error, to be set to 1.
-400 : Query error
SYSTem:KLOCK
(Command/Query)
The SYST:KLOCK <0|1|ON|OFF> command locks the front face.
To the question SYST:KLOCK?, the instrument returns the lock status of the front face.