Operation Manual

6 MX670 / MX675

.6 MAX MIN function (500 ms)

To activate the MAX MIN function, press on the MIN MAX

PEAK button. The MIN value is then displayed. (the MIN

symbol is displayed steady; the MAX symbol is displayed

flashing)

By pressing again on the key, the MAX value will be displayed

(the MIN symbol is displayed flashing; the MAX symbol is

displayed and steady).

By pressing the key again, the clamp returns to normal mode.

3.7 BACKLIGHT Function

By pressing the

button, the backlight

of the

display goes

on, press again, it goes off.

The "auto power off" function activates after 3 minutes.

3.8 DISPLAY Function

When measuring voltage or AC current, pressing the

DISPLAY key replaces the nature

of the

secondary display by

the signal frequency

of the

main display. Pressing again

returns to the previous display.

In temperature measurement, pressing the DISPLAY key

switches the displays in degrees Celsius and degrees

Fahrenheit

of the

measured temperature.

4 OPERATION

4.1 AC voltage measurement

• Position the switch on V .

Connect the red test lead to the

"+" terminal and the black test

lead to the "COM" terminal.

Put the

touch prods in contact

with the

measurement points

under AC voltage.

Read the result of the

measurement on the display.