Manual

Characteristics
Two-channel digital Oscilloscopes 95
Technical characteristics (cont'd)
X-Y mode
X-Y inputs
CH1 (X)/CH2 (Y)
Phase error
± 3 degrees
Range of sampling rates in XY
mode
XY mode sampling rate:
12,5kSa/s ~ 250MSa/s (MemDepth: Normal)
500,5kSa/s ~ 250MSa/s (MemDepth: LongMem)
Equipment frequency counter
Reading resolution
6 Bytes
Accuracy
± 0.01%
Range of operating frequencies
of the meter
With DC coupling, the range of operating frequencies of the
meter is from 10Hz to the max frequency of the bandwidth.
Type of signal
All triggering source signals that generate triggering events
(except: "pulse width" trigger and "video" trigger).
Control panel function
Auto Set
Self-adjustment of the Vertical and Horizontal systems and of the
trigger
Backup/Restoration
Internal backup capacity: 2 REFerences, 20 configurations, 20
Traces. Possibility of saving traces and configurations to external
USB flash memory.
Measurement system
Automatic measurements
(32 types)
Vpp, Vmax, Vmin, Vamp, Vtop, Vbase, Vavg, Mean, Crms, Vrms,
ROVShoot, FOVShoot, RPREShoot, FPREShoot, Rise time, Fall
time, Freq, Period, +Wid, -Wid, +Dut, -Dut, BWid, Phase, FRR,
FRF, FFR, FFF, LRR, LRF, LFR, LFF
Measurements by cursor
Modes: Manual, Track, and Auto