Manual

Functional description
Two-channel digital Oscilloscopes 89
Remote control (cont'd)
Check the instrument
The information concerning the device found is displayed. The following
image is an example. The serial number of the device and information
concerning the USB interface are displayed.
Test communication
 Send Command
Click on "Send Command" and from the keypad enter the SCPI command
"*IDN?"; press the "Enter" key to send the command. The EasyScopeX
software will send the command, accept the data sent by the instrument in
response to the SCPI command, and, in our case, display the information
about the instrument:
 Send Command
sends SCPI commands to the oscilloscope
 WaveTrace
recovers traces (sets of points acquired)
 Screen Capture
captures screens
 Scope Configuration
For more details, we invite you to look up the help file of the EasyScopeX software.