Manual

Functional description
Two-channel digital Oscilloscopes 87
Functional description
VIII - UTILITY 4/4 (cont'd)
Parameterizing
the Recorder
Option
Values
Description
Viewer
Full
screen
Half
screen
Recording and reading of channels in full-
screen mode
Recording and reading of channels in
half-screen mode
CH1 is displayed at the top of the screen,
CH2 at the bottom of the screen
Record
Continuou
s
Single
The recorder captures the signal in the
channel continuously; the most recent part
of the signal overwrites the oldest part.
The recorder stops when its memory
reaches 6M.
Replay
By point
By frame
During replay, the signal is refreshed from
left to right on the screen
During replay, the signal on the screen will
be completely refreshed according to the
capture time of each frame
Return
exit from the recorder parameterizing
interface
Steps
1. Press the "UTILITY" key to access the "Utility menu".
2. Press the "Next Page" button to access the fourth page of the "Utility menu".
3. Press the "Save" button to access the manual recording.
4. Press the "Option" key to select the parameter
5. Press the "Save" button to enter the Save menu and then press the "Start"
button to start recording the signal
6. When the signal recording is complete, press the "Play" button to view the
recorded signal.