Manual

Functional description
Two-channel digital Oscilloscopes 75
Functional description
VIII - UTILITY 1/4 (cont'd)
Utility
page 3
Option
Values
Instructions
Firmware
update
You can update the firmware of the oscilloscope
from a USB flash memory (this takes
approximately 2 minutes).
Pass/Fail
Press this key to access the Pass/Fail menu.
Record
Press this button to access the Signal Recording
menu.
I/O
adjustment
Press this key to access the "I/O Adjustment"
menu (See table below).
Next page
Page 3/4
Press this key to go to the next page.
I/O adjustment
menu
Option
Valeurs
Description
IP Setting
Configure the IP address and
complete the IP, MASK and Gate
Way fields, switch between fields and
validation with universal "Toggle"
button
Manual IP or parametrable DHCP
search