Manual

Functional description
Two-channel digital Oscilloscopes 71
Functional description
VII - STORAGE system (cont'd)
3.3 Save an Image
A screen grab can be saved to a USB flash memory, but cannot be restored.
It can be displayed using the appropriate PC software.
Option
Values
Description
Type
Image
(Picture)
Screen grab Save/Recall menu.
Print key
Save the
picture
When the USB flash memory is connected
to the oscilloscope (the icon of the USB
flash memory is displayed at the top of the
screen), choose "Save picture" and press
the "Save" button to access the
Save/Recall interface.
Save
Go to the Save/Recall interface.
Steps
1. Select the screen grab.
2. Press the "SAVE/RECALL" key to display the "SAVE/RECALL" menu.
3. Press the "Type" key and choose "Picture".
4. Insert the USB key in the host USB port of the oscilloscope and wait for the
oscilloscope to initialize the USB flash memory (approximately five
seconds).
5. Press the "Save" key and choose "Print Image".
6. Press the "Save" key to access the "Save/Recall" interface.
7. Name the screen grab and then press the "Confirm" key (after
approximately five seconds a "Save data success" message is displayed on
screen). The image has been saved to the USB flash memory.