Manual

Functional description
Two-channel digital Oscilloscopes 69
Functional description
VII - STORAGE system (cont'd)
Save
Save traces in internal memory:
Steps
1. Inject a sinusoidal signal on channel 1 and press the "Auto" key.
2. Press the "SAVE/RECALL" key to display the "SAVE/RECALL" menu.
3. Press the "Type" key and choose "Curves".
4. Press the "Record" key and choose "Device".
5. Press the "Curve" key or turn the "Adjust" knob to choose "No. 1".
6. Adjust "Volts/div" or "S/div" if necessary to optimize the display of the trace.
7. Press the "Save" button.
Restore
To restore the signals:
Steps
1. Press the "SAVE/RECALL" key to display the "SAVE/RECALL" menu.
2. Press the "Type" key and choose "Curves".
3. Press the "Record" key and choose "Device".
4. Press the "Curve" key or turn the "Adjust" knob to choose "No. 1".
5. Press the "Load" key.