Manual

Functional description
Two-channel digital Oscilloscopes 67
Functional description
VII - STORAGE system (cont'd)
Save steps
Save the "Dots" type Display configuration to a USB key:
1. Press the "SAVE/RECALL" key and choose "Parameters".
2. Insert the USB flash memory in the port of the oscilloscope and wait
for the oscilloscope to initialize the USB flash memory (approximately
5 seconds).
3. Press the "Save" key and choose "Folder".
4. Press the "Save" key to access the Save/Recall interface.
5. Press the "New folder" key
6. Press the "Delete folder" key to delete a folder
7. Press the "Modify" key to modify a folder.
8. Press the "New file" key to create a new file
9. Press the "Delete file" key to delete a file
10. Press the "next page" key, then the "Rename" key, to change the
name of the file or of the directory.
11. Turn the "Adjust" knob to choose the folder, then press "Confirm" to
save the configuration to the USB memory.
Steps
in Restoration
To restore a configuration saved to a USB key:
1. Press the "SAVE/RECALL" key
2. Insert the USB key in the host USB port of the oscilloscope and wait
for the oscilloscope to initialize the USB flash memory
(approximately 5 seconds).
3. Press the "Type" key and choose "Parameters".
4. Press "Load" and choose "Folder".
5. Press "Save" to display the Save/Recall interface
6. Choose the file and press the "Load" key (after approximately five
seconds a "Read data success" message is displayed). The
configuration has been restored from the USB memory.