Manual

Functional description
66 Two-channel digital Oscilloscopes
Functional description
VII - STORAGE system (cont'd)
Save
steps
Example: Save the configuration corresponding to a "Dots" type display in the
internal memory of the oscilloscope.
1. Press the "SAVE/RECALL" key to display the "SAVE/RECALL" menu.
2. Press the "Type" key and choose "Set-ups".
3. Press the "Save To" key and choose "Device".
4. Press the "Set-up" key and choose "No. 1".
5. Press the "DISPLAY" key to view the "Display" menu.
6. Press the "Type" key and choose "Dots".
7. Press the "SAVE/RECALL" key to display the "SAVE/RECALL" menu.
8. Press the "Save" key.
Recall steps
If you want to restore Saved configuration "No. 1".
1. Press the "SAVE/RECALL" key to display the "SAVE/RECALL" menu.
2. Press the "Type" key and choose "Set-ups".
3. Press the "Save To" key and choose "Device".
4. Press the "Parameters" key or turn the "Adjust" knob to choose "No. 1".
5. Press the "Load" (Recall) key.
2.2 Save
the set-up to
a USB key
Option
Values
Instructions
Type
Set-up
parameters
Set-up Save/Recall menu.
Save To
File
Save the configuration to USB flash memory.
Save
Go to the Save/Recall interface