Manual

Functional description
Two-channel digital Oscilloscopes 65
Functional description
VII - STORAGE system (cont'd)
2. Save and Recall
of the configuration
The whole configuration is stored in non-volatile memory. When you restore
the configuration, the oscilloscope will be in the mode from which the
configuration was saved.
The oscilloscope saves the current configuration if you wait three seconds after
the last change before powering it down. The oscilloscope loads this
configuration when next powered up.
2.1 Save/Recall the
configurations of
the device
Option
Values
Description
Type
Set-up
parameters
Oscilloscope configuration "Save/Recall"
menu
Record on
Device
Save the configuration in the internal memory
of the oscilloscope.
Config
No.1 to No.20
Press the "Configuration" button or turn the
"Adjust" knob to choose the location.
SAVE
Run the save
RECALL
Restore the configuration