Manual

Functional description
64 Two-channel digital Oscilloscopes
Functional description
VII - STORAGE system (cont’d)
1.1 Recall of files
The "Load" key can be used to restore your configuration files. When you
have selected the file in question and it is highlighted in the main zone of the
screen, press the "Load" key to restore the configuration from the USB flash
memory.
Note: The "Load" button is deactivated when BMP or CSV files are
selected.
The directories and files have "Rename" and "Return" keys on Page 2/2. Use
these keys to rename a file or directory, or to exit from the "SAVE/RECALL"
screen.
1.2 Creation of
directories and files
● The "New File" menu is identical to the "New Directory" menu. Only its title
changes. The "InputChar" key adds the chosen character at the cursor
position in the Name field.
● Move the cursor in the name field using the "→" and "←" buttons.
● Turn the Adjust knob to browse the selection of characters. When the
desired character is highlighted, press the Adjust knob or press the
"InputChar" button to add it at this position in the Name field.
● Additional selections for "Return", "Delete", and "Reset" are available to
facilitate entry and can be accessed by the Adjust knob in the same way.
● Press the "Confirm" button (when the field name is complete) to save the
file in memory. When the "Confirm" button has been used, a "Data Store
Success!" message appears briefly and the new file or directory appears
on your USB flash memory.