Manual

Functional description
Two-channel digital Oscilloscopes 61
Functional description
VI - MEASUREMENT system (cont'd)
Steps
Voltage measurements
1. Press the "MEASURE" key to display the "Automatic Measurements"
menu.
2. Press the first key at the bottom to access the "second measurement
menu".
3. Choose the type of measurement. If you press the "Voltage" key, the
"Voltage measurement" menu is displayed on screen.
4. Press the "Source" key to choose the source channel of the
measurement, "CH1" or "CH2".
5. Press the "Type" key to select the type of measurement. The icon and
the corresponding value are displayed under the type of measurement.
6. Press the "Return" key to access the home page of the "automatic
measurements" menu. The last type of measurement chosen and the
corresponding value will be displayed at bottom right on the home
page.
You can display the other types of measurement in the same way.
Remark: On the "MEASURE" home screen, five types of measurement
can be displayed at most.