Manual

Functional description
Two-channel digital Oscilloscopes 31
Functional description
III - TRIGGER system (cont'd)
Pulse trigger,
page 2
Option
Values
Description
Type
Pulse
Selection of the pulse corresponding to the
triggering condition.
Mode
Auto
Normal
Single
Choose the type of triggering. The normal
mode is suitable for most applications of
triggering on pulse width.
Set Up
Access the "Trigger Configuration Menu".
Steps
1. Choose the type
1) Press the "TRIG MENU" key to display the "Trigger" menu.
2) Press the "Type" option key and choose "Pulse"
2. Configure the condition
Press the "When" key to choose the " ", " ", " ", " , " "or"
" condition
3. Adjust the Pulse width
Turn the "Adjust" knob to adjust the width of the pulse.